Vision VFM-F50T - motorised trolley / stand - 47-90 inch - VESA 800x600mm - up to 130 kg - black

The Vision VFM-F50T is an extremely flexible and motorised trolley and stand in one. In just a few simple steps, the VFM-F50T is an elegant stand one moment and a high-quality trolley the next. This variable mount from Vision is designed at all times for displays between 47 and 90 inches with a VESA standard of up to 800 x 600 mm. To ensure that all participants can see the content clearly, the Vision VFM-F50T offers electrical height adjustment of the screen height with a free travel path of 800 mm. Especially with heavy displays, tilt resistance and high stability are essential and with the VFM-F50T trolley you are always on the safe side. 

You can quickly convert this flexible mount into a stand at any time or equip it with additional equipment and thus adapt it to your wishes and requirements at any time. The Vision VFM-F50T trolley is delivered to you largely pre-assembled and cuts a fine figure at any installation site.

 Thanks to the motorised height adjustment, you can easily raise one on the VFM-F50T bracket at the touch of a button so that people in the audience far away can see the presentation clearly above the heads of others, or lower it conveniently , for example for use by children in school lessons. The maximum stroke is 800 mm. Important, especially when used with children: if an obstacle is in the way when lowering the screen, the load of the screen simply rests on the top of the obstacle. Thus, the obstacle cannot be pulled down or crushed. There is no electronic safety circuit, which can sometimes fail. A wired remote control with simple functions for height adjustment up and down is included. It is attached to the back of the screen with a adhesive strip. Alternatively, the F50T mount can be activated with a control system via RS-232, adding preset positions and top and bottom stop positions.

You can attach a display to the VFM-F50T mount in either portrait or landscape orientation. This means you are always flexible and can react quickly to changing requirements. By the way, the Surface Hub with 85 inch can also be securely mounted on this trolley. The necessary spacers are included directly in the scope of delivery.

This trolley comes with a heavy-duty 800×600 wall mount from Vision, which is suitable for most large-format flat screens from 47 to 90 inches, depending on the VESA pattern and weight limit. If your display has a different VESA pattern, you can always mount one of Vision's other wall mounts (VFM-W4X4, VFM-W6X4 or VFM-W10X6) on this trolley.

Heavy-duty components, allow a load capacity of up to 130 kg for this trolley. A powerful linear drive, despite high load ensures a lift movement of 16 mm per second, which is a very decent value.

Large swivel castors of 100 mm facilitate movement and reduce vibrations. The castors are designed in such a way that they function smoothly even when pushed on a carpet. The outriggers to which the castors are attached are designed in such a way that they do not pose a tripping hazard. All 4 castors can be locked, so that the trolley simply stays where you need it.

Clean cable routing is not only important for safety reasons - it also looks better. With the VFM-F50T trolley from Vision, cables can be organised with generously sized cable entries on the sides. The front panel and the rear cover of the stand can be removed so that you can easily access everything that is connected to the trolley in terms of technical equipment. There is enough space to hide cables, media players, mini PCs and power distributors invisibly from the column.

To test the stability of the trolley in practice, it is extended to maximum height with a load of 100 kg, with all four wheels locked. The tipping point is 16° to the side or lengthwise, exceeding the strict stability requirements of the UL 1678 standard. Note: For safety reasons, please do not recreate this test yourself.

By removing the wheels and rear legs, the screen can simply be leaned directly against a wall safely and without stressing the wall. Perfect if you don't have a load-bearing wall available at but still need a safe and reliable attachment. Furthermore, this type of set-up is also much more space-saving, as the mount stands against the wall. This mount also cuts a fine figure at any time as a virtual lectern or touch table. The scope of delivery includes a 45° angle bracket so that you can also use this holder as a lectern or touch table   . 

With a 45° tilt, the display must not weigh more than 50 kg and you should check in advance whether the display may be installed at this tilt angle. Many manufacturers prohibit installation at more than 15 degrees. Our service team will be happy to help you select a suitable signage display for this type of installation. Please feel free to contact us.

Multimedia devices are used especially for conferences or lectures. The trolley is optimised for this purpose. For video conferences, can also be ordered with the VFM-WVC shelf. It is used to attach cameras such as the Logitech Rally or Meetup. There are VESA 100 holes on the side for secure mounting of the tray. You can also fix smaller products - such as iPad cases - there . Speakers and soundbars can be fixed with an additional bracket that must be attached to the VFM-WVC. The part number for this is VFM-WVC/RSB.

With the Vision F50T trolley , all components including mounting elements and castors are contained in one box. Vision has made the packaging even more robust to withstand the stresses of transport to the installation site. If you want to use a different wall mount on the column, the larger VFM-W10X6 or the smaller VFM-W6X4 and VFM-W4X4 wall mounts are compatible with the Vision VFM-40/W.

This product is intended for professional use only and is therefore not sold to private customers. We thank you for your understanding.